BITUMEN EMULSION SS
Emulsion SS is particularly designed to delay the setting time to permit mixing with fine aggregates, form a continuous adhesive film without stripping as well as for higher penetration for priming applications. Cationic slow setting emulsion SS made as per ASTM specification is recommended for application requiring higher stiffness of residual binder and specifically suited for crack filling along with priming application.
SPECIFICATION: PHYSICAL AND CHEMICAL REQUIREMENTS
ADVANTAGES
- Environment Friendly
- No heating required
- Cost efficient
- Easy and uniform spray
- Low Temperature curing
- Slow setting time
- High adhesive properties
- Prevents slippage of structural layers
APPLICATION
- Prime
- Fog
- Slurry Sealing /Micro surfacing
- Soil
- Open and dense graded premixes.
To Ensure Best Result
- Use without diluting Bitumen Emulsion with any solvent
- Emulsion should not be stirred with wood or
- Use at ambient
- Roll the Bitumen Emulsion drums 5 times before
- Barrel should not be kept